Ulveo / Fire & Smoke Detection
Spot fire and smoke on the cameras you already have
Ulveo watches your existing CCTV around the clock and flags visible smoke and visible flame the moment they appear — so the right person hears about it sooner. No new sensors. No new hardware.
- Works with existing RTSP cameras & NVRs
- Smoke and flame labeled separately
- Complements your fire alarms
Two scenarios, one pipeline
The same detection runs on both clips. Watch the labels appear as smoke and flame become visible.
A home bedroom camera. Ulveo labels the smoke, then the flame, as each appears — and both at once when both are present.
A retail store. This scene is AI-generated to show a different camera angle and layout — it is a simulation, not real CCTV.
From your camera to the right person
No new devices. Ulveo sits on top of the video you already record.
Connect your cameras
Point Ulveo at your existing RTSP cameras or NVR. Nothing to install on the ceiling or the wall.
Watch every frame
Our always-on perception layer looks for visible smoke and visible flame, and labels each one separately on screen.
Alert with context
The right person is notified through channels such as WhatsApp, SMS, email or Slack — with the camera and the moment attached.
Follow throughPREVIEW
Our agent layer investigates what happened, decides the response and escalates if nobody acts. It's in development today.
Anywhere a camera is already watching
If a space already has cameras, it can have another layer of fire awareness.
- Warehouses & factories — wide floors already covered by CCTV.
- Retail & hospitality — stores, back-of-house areas and public spaces.
- Healthcare & care homes — where a fast response matters most.
- Offices, schools & buildings — corridors, lobbies and shared areas.
What this is — and isn't
- It complements certified smoke detectors, fire alarms and suppression systems. It doesn't replace them.
- It detects fire and smoke that is visible to a camera. Camera angle, distance, lighting and obstructions all matter.
- Steam, dust and glare can resemble smoke to any camera-based system. The right test is a pilot on your own cameras.
- The retail clip above is an AI-generated simulation. We don't quote accuracy figures from demo clips.
Common questions
Does video fire detection replace smoke detectors or fire alarms?
No. Ulveo complements certified smoke detectors, fire alarms and suppression systems — it doesn't replace them. It adds an extra set of eyes by spotting visible fire and smoke on cameras you already have, so the right person can be alerted sooner.
Do I need new cameras or sensors?
No. Ulveo connects to any RTSP-compatible IP camera or NVR, so it works with the cameras you already have. There's no new hardware to install.
How do I get alerted?
Alerts go to the right person through channels such as WhatsApp, SMS, email or Slack, with the camera and the moment attached. Our agent layer, which is in preview, adds investigation and follow-through — including escalating when nobody responds.
Can it tell smoke from steam, dust or glare?
Steam, dust and reflections can look like smoke to any camera-based system, and how well they're separated depends on your camera view and environment. We don't claim it's solved for every space — the honest way to find out is a pilot on your own cameras.
Is the footage on this page real?
The bedroom clip is real camera footage. The retail-store clip is an AI-generated simulation and is labeled as one on the video. We don't quote accuracy figures from demo clips.
Other detections
See it on your own cameras
Tell us about your space and we'll show you what Ulveo picks up. We reply within one business day.